Denver Vacuum Breaker Repair
When it comes to Denver vacuum breaker repair, our experts are always the ones to trust. The vacuum breaker is the fixture located outside of the house between the water shut off and sprinkler control box. Older vacuum breakers somewhat resemble a bell. Not sure what it looks like? Click Here.
Vacuum Breakers prevent contaminated water from being siphoned from outside sources into the drinking water distribution system. In short, they help keep your drinking water clean. And our experts in vacuum breaker repair in Denver can help repair it if it breaks.
Why Is Vacuum Breaker Repair In Denver Important?
Whenever there is a loss of pressure in the water system, water is siphoned through any open faucet or operating sprinkler system into the water system. If the hose happened to contain contaminated water (I.e. lying in a water puddle, hooked to automatic sprinklers, etc.) the contaminated water could possibly be siphoned back into the water system and delivered to another customer. In short, these devices help keep your water safe and free from contamination. That’s why you would need an expert in vacuum breaker repair in Denver for help. We also have experts in Denver vacuum breaker replacement as well
Vacuum Breaker Installation In Denver Helps Prevent Backflow
Our experts in vacuum breaker repair in Denver can tell you that there are new state regulations. The new state regulations prohibit a water utility from providing new service, or change in service, to any business or residence without a vacuum breaker installed on all outdoor faucets and sprinkler systems. In short, no vacuum breakers – no water! At Brothers Plumbing, Heating & Electric, we can professionally repair, replace or install a vacuum breaker or backflow preventer for your sprinkler system. So if you need an expert in vacuum breaker installation in Denver, don’t forget to give us a call.
Get in touch with our team of Denver vacuum breaker and backflow preventer experts by giving us a call at (303) 468-2294 today!
FAQs
What is a vacuum breaker and where is it located?
A vacuum breaker is a backflow-prevention device that stops contaminated water from being siphoned into your home’s drinking water. It’s typically outside, between the main outdoor shutoff and the sprinkler control box.
Why is a vacuum breaker important?
If system pressure drops, water can siphon backwards through hoses or sprinklers and pull in dirt, fertilizers, or standing water. A working vacuum breaker prevents that contamination from entering your potable water.
Do I need a vacuum breaker on every outdoor faucet and my sprinkler system?
Yes, current state regulations require backflow protection on all outdoor hose bibs and irrigation systems. No vacuum breakers can mean no new or changed water service.
How do I know my vacuum breaker needs repair?
Common signs: constant dripping from the top/relief port, water leaking around the bonnet or test ports, sprinklers not pressurizing properly, or visible cracks (often after a freeze).
Can a leaky vacuum breaker be repaired, or should it be replaced?
It depends on the condition. Worn seals/springs can often be rebuilt; cracked bodies (usually freeze damage) require full replacement. We’ll inspect and recommend the safest, code-compliant option.
What causes vacuum breakers to fail?
Freeze damage, mineral buildup, worn internal parts, incorrect installation height/orientation, and running systems without proper winterization are the usual culprits.
Do vacuum breakers need routine maintenance or testing?
Yes. Annual inspection is smart, especially before irrigation season—to check for leaks, proper operation, and code compliance. Some backflow assemblies also require documented testing per local rules.
Are vacuum breakers and backflow preventers the same thing?
A vacuum breaker is one type of backflow preventer. Depending on your system, a different assembly may be required to meet code.
